Home

About Us

Contact Us

TRADITIONAL TIME PIECES
Our 24-Hour Timers made Paragon famous and their popularity continues. They are designed for uses that repeat the same ON/OFF schedule everyday. 24-Hour Timers . . . perfect when your applications repeat daily. Ability to Skip Days Paragon-developed Skip-A-Day feature allows units to be programmed to skip 1 to 7 days. Convenient  Schedule Override Override temporarily reverses switch operation without permanently disturbing set schedule.

 

TRY PARAGON'S WB100 SERIES OF IN-WALL TIME CONTROLS The Paragon WB100 series of in-wall programmable timers offers characteristics distinctive from others in this category. While our other 24-Hour Timers mount in enclosures, on surfaces, or in sub-panels, all three models in the WB100 series install into standard single- or two-gang electrical wall boxes. These units easily replace SPST switch configurations, and internal mechanisms are protected by decorative faceplates mounted to a wall. All you need to install them is a screwdriver. The WB100 series is great for commercial and residential applications. These units meet ASHRAE, national and state ventilation and indoor air quality standards for automatically controlling residential and commercial ventilation fans. In residential applications, the WB100 series programs lights and fans, keeping houses safe and comfortable when homeowners are gone. Up to 36 ON/OFF events can be programmed, and manual override capabilities are available. Paragon’s WB100 series of in-wall timers puts you in control.

• In-wall programmable timers designed for installation in standard, single- or two-gang electrical wall boxes • Units easily replace SPST toggle switch • Up to 36 ON/OFF events available • 24-hour dial is programmable into 72 separate 20-minute time intervals • Contains ON/OFF/AUTO sliding tab for manual override • Comply with ASHRAE, national and state ventilation and indoor air quality standards • Can be used in residences to give homes a lived-look when homeowners are away • WB101 unit dimensions are 2-3/4" W x 4-1/2" H x 2-1/2" D • WB102 unit dimensions are 4-1/2" W x 4-1/2" H x 2-1/2" D • WB103 unit dimensions are 4-9/16" W x 4-1/2" H x 2-1/2" D • Available only in white [VIEW SPECIFICATION & MANUAL]

 

TECHNICAL INFORMATION

HOW TO SPECIFY Installer shall furnish and install . . . EC4000, EC11D  with 1 SPDT EC4004             with 1 SPST EC4005             with 1 DPST Timekeeping Capabilities The control shall be utilized as a traditional 24-hour general-purpose time control. Programming Attributes and Capabilities Events/Set Points The control provide for . . . 16 events (EC4000 series) 288 events in 5-minute intervals (EC11D) Holidays The control shall have Skip-A-Day feature to omit any day or days of the week. Override All controls shall provide a manual toggle override that will change the position of the switch until either overridden or the next timed event. Sensory Inputs N/A Hardware Attributes Carry-over The control shall provide . . . 7 days power without a battery (EC4000 series) Minimum of 100 hours with a 9-volt alkaline battery or 275 hours with a 9-volt lithium battery (EC11D) Display The clock format shall be selectable 12-hour (civilian) or 24-hour (military) clock format with LCD display of time of day and day of the week. Enclosure* Control shall be housed in a . . . NEMA 1 steel (EC4000 series) NEMA 3R non-metallic lockable tamper resistant enclosure with clear-view cover (EC4000 series) or NEMA 3 steel (4000 series) DIN rail mountable non-metallic enclosure (EC11D) *See product comparison table for specific variations. HOW TO SPECIFY Installer shall furnish and install non-metallic corrosive proof . . . P101            with 1 SPST P103, P104   with 1 DPST Timekeeping Capabilities The control shall be utilized as a traditional 24-hour general purpose time control. Programming Attributes and Capabilities Events/Set Points The control shall provide for 48 events in a 24-hour period. Holidays The control shall have Skip-A-Day feature.* Override All controls shall provide a manual toggle override that will change the position of the switch until either overridden or the next timed event. Sensory Inputs N/A Hardware Attributes Carry-over N/A Display The clock format shall be a 24-hour (military) dial with clutched clock face. Interface N/A   Enclosure* Control shall be housed in a . . . NEMA 1 steel or NEMA 3R non-metallic lockable tamper resistant enclosure with clear-view cover *See product comparison table for specific variations.

HOW TO SPECIFY Installer shall furnish and install . . . 4001, 4002, 4011    with 1 SPST 4003, 4004, 4008, 4013, 4014             with 1 DPST 4005, 4006, 4007    with 1 SPDT Timekeeping Capabilities The control shall be utilized as a 24-hour general purpose time control. Programming Attributes and Capabilities Events/Set Points The control shall provide for 14 events. Holidays The control shall have Skip-A-Day feature.* Override All controls shall provide a manual toggle override that will change the position of the switch until either overridden or the next timed event. Sensory Inputs N/A Hardware Attributes Display The clock format shall be a 24-hour (military) dial with clutched clock face. Interface N/A Enclosure* Control shall be housed in a . . . NEMA 1 steel or NEMA 3R non-metallic lockable tamper resistant enclosure with clear-view cover *See product comparison table for specific variations. HOW TO SPECIFY Installer shall furnish and install . . . WB101, WB102, WB103 1- or 2-gang electrical wall boxes Timekeeping Capabilities The control shall be utilized as a 24-hour general purpose time control. Programming Attributes and Capabilities Events/Set Points The control shall provide for 36 events in a 24-hour time period with 72 separate 20-minute time intervals. Holidays N/A Override All controls shall provide a sliding tab for manual override. Sensory Inputs N/A Hardware Attributes Display The clock format shall be a 24-hour (military) dial with AM/PM format. Enclosure* Control shall be housed in . . . All units contain faceplate and mount in electrical wall box. *See product comparison table for specific variations.

*1 Hp at 120 Vac, 3 Hp at 240 Vac
Frequency: 50/60 Hz for EC4000 series
For P100 series: P is plastic, PC is plastic enclosure with clear-view cover, S is Skip-A-Day
Knockouts—see page 40
 

© Copyright 1999-2007 Invensys Controls. All rights reserved.
Privacy Policy • Legal Information