|
Home
About Us
Contact Us
|
|
 |
ET
SERIES |
INTERVAL
TIMERS
|
| Energy control meets
economy with Paragon’s ET Series of Electronic Light
Switch Timers. Ideal when lights are needlessly left on or
forgotten, the ET Series offers a complete solution superior
to occupancy sensors. Simply set the dial for the amount of
time the lights are to be left ON, from 1 minute to 18
hours, and the lights will go OFF automatically when that
time expires.
The ET Series is a
family of 10 different models, designed to meet
incandescent, fluorescent and diverse voltages.
|
You
will need Adobe
Acrobat Reader to view the manuals. If you do not have
this installed, you can download it from Adobe's
web site.
|
|
FEATURES
& BENEFITS
 |
Fast, easy,
low-cost installation saves contractors time and
money. |
|
Simple
setting requires no technical expertise. |
|
Guaranteed
lighting shut-off ensures lower utility bills. |
|
Designed
with a warning flicker before lights turn OFF,
allowing ample time to manually reset the timer. |
|
Hidden dial
makes timer tamper-proof. |
|
|
Design
allows timer to fit in single, double or multi-gang
decorator wall plates. |
|
“T”
setting allows 15-second test mode. |
|
Switches
available in white or ivory to match any décor. |
|
3-way
switching available. |
|
UL and CSA
listed means quality and durability are built into
every time control. |
|
|
ENVIRONMENTAL
Operating Temperature 0° F to 104° F
Operating Humidity 90% RH-non-condensing
The ET should be mounted in a single gang or multiple gang wall
box, in an environment that is free of excessive contaminants such
as oil, grease, dirt, etc.
PHYSICAL
Color of Toggle Switch Ivory (standard), White (optional)
Weight 4.23 lbs.
Dimensions:
Width 1.74” (4.4 cm)
Height 2.79” (7.1 cm)
Depth 1.32” (3.4 cm)
Agency Recognition Timer is UL listed and CSA certified.
|
HOW
TO SPECIFY
Installer shall furnish and install Paragon ET
Series Electronic Light Switch Timer. Timer shall be solid
state with adjustable time range from 1 minute to 18 hours.
The control shall be tamper-proof with out-of-sight
programming dial and shall operate from 24 Vac to 277 Vac. The
control shall be rated to switch up to 1100 watts (ET1100,
ET1100/3WAY), or 2000 watts (ET2000). The control shall be
capable of operating between 24 Vac and 277 Vac. The control
(ET1100/3WAY & ET1100F/3WAY) shall be capable of
controlling 3-way switching applications. The control
(ET1100F, ET1100F/3WAY, ET2000F) shall be capable of providing
a warning flicker to signal the end of ON time. |
|
ELECTRICAL
SPECIFICATIONS
| ET1100 |
SPST |
0.25-4.00
A Resistive |
24V |
6-96
Watts |
| ET1100F |
SPST |
0.25-4.00
A Ballast |
120V |
30-480
Watts |
| ET1100/W |
SPST |
0.25-4.00
A Tungsten |
208V |
50-830
Watts |
| ET1100F/W |
SPST |
1/8
Hp @ 120V |
240V |
60-960
Watts |
|
|
1/3
Hp @ 240V |
277V |
70-1,100
Watts |
|
|
|
0.25-4.00
A Resistive |
24V |
6-96
Watts |
| ET1100/3WAY |
SPDT
Toggle |
0.25-4.00
A Ballast |
120V |
30-480
Watts |
| ET1100F/3WAY |
SPDT
Toggle |
0.25-4.00
A Tungsten |
208V |
50-830
Watts |
|
|
1/8
Hp @120V |
240V |
60-960
Watts |
|
|
1/3
Hp @ 240V |
277V |
70-1,100
Watts |
|
| ET2000 |
SPST
Toggle |
0.75-7.25
A Resistive |
24V |
18-174
Watts |
| ET2000F |
SPST
Toggle |
0.75-7.25
A Ballast |
120V |
90-870
Watts |
| ET2000/W |
SPST
Toggle |
0.75-4.00
A Tungsten |
208V |
150-1,500
Watts |
| ET2000F/W |
SPST
Toggle |
1/6
Hp @ 120V |
240V |
180-1,740
Watts |
|
|
1/2
Hp @ 240V |
277V |
210-2,000
Watts |
| • |
F
indicates warning flicker feature to signal
the end of ON time. The warning flicker will
turn lights OFF for two 1/2 second intervals
beginning approximately three (3) minutes
prior to timing out. |
| • |
3WAY
indicates 3-way switching capability. |
| • |
W
indicates white toggle switch (ivory is
standard). |
|
|
TYPICAL WIRING
DIAGRAMS
|
|
INSTALLATION
DIAGRAMS
|
|
